By jmcadmin In
Periodical reject separator PSN belongs to a family of secondary pressure pulpers. The machine is designed particularly for separation of undesired impurities, such as foils, plastic particles, leathers, rubber pieces,
By jmcadmin In
Self-cleaning trash rack is designed to separate solid floating trash (foils,polystyrene, wood, etc.) from white water dewatering devices. In the lines processing waste paper the racks are placed after the
By jmcadmin In
Spinning impurities cutter DZS is designed for mechanical cutting of spinning impurities tangle drawn from the pulper tank (horizontal or vertical type) when waste paper is pulped. Dovetailed sliding blades
By jmcadmin In
High-capacity pulping node comprises a pulper LCV-65 working in a continuous mode. Spinning trash is removed from the LCV-65 during the operation by means of trash tail ragger SN-13 and trash
By jmcadmin In
Spinning impurities ragger SN is designed for drawing spinning impurities out of a pulper tank, particularly during waste paper pulping. The machine is recommended only for continuously working pulpers. To
By jmcadmin In
Washing separators VSVare designed for deflaking, final screening and washing of rejects coming from primary cleaners in the waste paper processing lines. They run periodically in programmable mode with the following
By jmcadmin In
Mixing equipment PC through a horizontal agitator of the HP family is designed for mixing and homogenizing of fibrous suspensions with consistency up to 6 %. It keeps the stock in
By jmcadmin In
Waste roll cutters WRS are designed for cutting waste paper rolls. In the standard version, the cutter is delivered with a prismatic bed. In the extended version, it is delivered with
By jmcadmin In
Middle-consistency vertical pulpers MCV are designed for a highly intensive periodical pulping of white waste paper and liquid packaging board type Tetrapak with a consistency from 10 to 15 %.